The Reverb 2016 recreates the legendary
reverb algorithms of Eventide’s SP2016
Every aspect of the original effects has been duplicated, including every detail of the user parameters.
The Reverb 2016 is built for reverb, it’s not a multi-effects box. It was designed from the perspective that reverb is almost always used and warrants a dedicated box with an optimal user interface.
Recreating the original reverbs is the bread and butter of the Reverb 2016, but it also features new and enhanced versions of the originals. These new algorithms have the same basic structure as the originals but with more complex early reflections, higher density, and finer control of the parameters. They represent the natural evolution of the development work that maxed out the array processing power of the SP2016.
Features
Stereo Room, Room Reverb and High Density Plate
- Store up to 99 user presets.
- High-performance 24-bit DSP, 24-bit analog audio I/O, digital I/O and MIDI interface
- The Reverb 2016 UI is extremely easy-to-use featuring dedicated controls for each of the effect’s parameters.
- The controls and display are intuitive. The UI is optimized for the studio and for live performance.
Artists Using Reverb 2016
Reviews
All the charm of the original.
“I’ve used the Eventide SP-2016 on hundreds of projects since its initial release in 1983. I’ve always loved its smooth natural decay for vocals and orchestral tracks. The density of the reverb is great for drums and percussion. The new Reverb 2016 retains all the charm of the original while greatly reducing the noise floor and allowing much finer control of the reverb parameters.”
Mick Guzauski
Specifications
Digital Input
Digital S/PDIF Input
Sample Rate: 44.1kHz – 48kHz (downsampled to 40kHz)
Connector: Coaxial, RCA type
Digital Input is selected via front panel switch.
Digital Output
Digital S/PDIF output
Sample Rate: 44.1kHz or 48kHz with ext clock
Connector: Coaxial, RCA type
Digital output is always active at 44.1 kHz when not using digital input
Connectors
1/4″ T/R/S phone jacks (2)
XLR 3-wire balanced (2)
Impedance
+4dB/Bal switch position: 100kOhm
-10dB/Unbal switch position: 50K Ohms
Levels
+4dB/Bal switch position:
2dBu min for full scale
+20dBu max
-10dB/Unbal switch position:
-14dBu min for full scale
+8dBu max
Connectors
1/4″ T/R/S phone jacks (2)
XLR 3-wire balanced (2)
Impedance
125 Ohms, each side, balanced
Levels
+18dBm max, full scale, balanced/unbalanced
Frequency Response
Dry 20Hz-20kHz, +/-1dB
Wet 20Hz-16kHz, +-1dB
Dynamic Range
>90dB
20 Hz – 20 kHz, Non A-weighted
Sample Rate
40.0 kHz
Conversion
24 Bits A/D, 24 Bits D/A
Environment
Operating temperature: 32° to 104°F (0° to 40°C)
Storage: –20° to 170°F (-30 to 75°C)
Relative humidity: 95% non-condensing
Throughput delay
Less than 2 ms.
THD
<=0.05%, 20Hz-20kHz
Crosstalk
<=45db below full scale
Dimensions
Width 19″
Depth 6″
Height 1.75″
Weight
9.5 pounds
